How to play Pipes Puzzle

Start the free game, then turn pipe tiles to send water from the pump to the outlets. All controls are available on touchscreens and keyboards.

Connect the pump

Tap or click a pipe tile to turn it clockwise by a quarter turn. Open pipe ends only connect when they face each other. Start with the tile beside the pump and follow the filled path one tile at a time. If the water stops partway across the board, check the ends at that gap.

Read the outlet numbers

The number before the slash is the water arriving at the outlet. The number after it is what the outlet needs. An outlet marked 1/2 is connected but still short by one unit. An outlet at 2/2 has the right amount. An outlet at 3/2 has too much.

Split six units between two outlets

In the second board, the pump supplies six units. Outlet A needs two and outlet B needs four. With both branches connected, an even split gives each three. Use the splitter control to send two units toward A and four toward B. Both outlet gauges need to match their targets before the board is clear.

Route around the narrow pipe

In the third board, check any tile marked with a flow limit. Sending four units along a route that carries only two still leaves that outlet short. Turn the elbows around the restriction so the larger branch can use a route with enough capacity. Recheck both outlets after changing the path.

Progress through all ten levels

Clear a board to unlock the next number above the grid. Levels 1–3 introduce connections, split amounts and pipe capacity. Levels 4–7 build longer routes and ask you to read the splitter orientation before choosing a split. Levels 8–10 add competing paths with tighter limits. On a larger board, a pipe marked ≤2 carries at most two units. Try tracing the outlet that needs the greater share back toward the pump before committing to a route.

Touch and keyboard controls

When a board is clear, select the next stage. Return to Pipes Puzzle.